Countermeasures to prevent corner missing of precision mold parts

Quality inspection is the most important part in the process of precision mold parts processing. Only qualified products can be sent to customers through layer upon layer inspection. But sometimes, in the detection process, it is easy to cause the workpiece missing angle. Today, we will list these wrong operations one by one.

1. The parts are placed disorderly, which is easy to bump together, resulting in missing corners. The correct way should be to put the parts in order and separate them with partition boxes.

2. When using the altimeter to detect, the electric needle of the altimeter is placed on the edge to detect, which will make the parts missing. The correct way should be to put the electric needle of altimeter in the middle part for detection.

3. When the burr is found in the inspection, the fiber oilstone inclines when removing, which will cause the edge collapse of precision mold parts. The correct operation method is to smooth the parts with fiber oilstone to remove the burr.

In the process of precision mold parts processing, every link needs to be more meticulous. If the parts are not easy to process, and there is a problem in the final detection link, it is not a failure. Therefore, a good grasp of these countermeasures can guarantee the smooth delivery of products. The most important thing is whether in the process of processing or testing process, the staff need to work carefully.

Dongguan Yize mold focuses on non-standard customization of precision mechanical parts and customization of mold parts for more than 10 years, providing customers with a wide range of precision machining technical support, including turning, milling, plane, circle, grinding, spark discharge, wire cutting discharge, PG optics and other process procedures, and can design and assemble a complete set of mechanical components and mold components according to customer needs. Welcome to map customization!